In need of any help! I have an Intellichlor IC40 that is less than one month old. Living in Israel, it's only had about 5 days of running time on it.. I started it and all was good. Suddenly, all the lights on the cell were off. Searched Pentair's site, it suggested the fuse and went from there. Sure enough, the fuse was blown. I replaced it, blew again instantly. 10AMP fuse. I check two things: first, replace fuse with cell unplugged and provide power to see if it blows while cell is unplugged, it did not. Second I connect the pH Controller unit to it and the ph. is working, without the IC40 . I took apart and cleaned the IC40 and re-attached. Hooked it all back up and tried to start it and fuse blew again.
What can I do?
I need to replace the IC40. It has warranty . how can I replace it?
I can send it to LA USA